Berger Top Super Primer

Berger Top Super Primer is formulated to resist alkali and moisture present in the new plaster surfaces. It forms a tough and flexible film which prevents passage of moisture from the substrate through the paint film. Before the application of Berger Super Primer, it is essential that the surface to be painted should be dry and free from grease oil and dust. It is for interior use only. Read more to add soft elegance with Candle Wax (S116) Silk Emulsion.

USES

 Berger Top Super Primer has been designed for use on cement render concrete, lime plaster, asbestos cement sheets and all other surfaces which require sealing against moisture or alkaline substrate.

 SURFACE PREPARATION

Before application of Berger Top Super Primer, it is essential that the surface to be painted should be dry and free from grease oil and dust.

APPLICATION PROCEDURE

Berger Top Super Primer can be applied by thinning (1:1) with water by volume for brush application (depend on surface absorbency). For better results apply two coats of Berger Top Super Primer. For previously painted old surfaces, remove all defective or poorly adhering material by rubbing with a suitable abrasive paper or stiff brush. To smoothen the surface, Berger Wall Putty can be applied after the application of Berger Super Primer.

DRYING TIME

Berger Top Super Primer dries within an hour and can be recoated after 2-3 hours.

COVERAGE

It covers 12-14 m2 per litre per coat (depends upon the absorbency of the surface).

PACKAGING

It is available in 14.56 litres pack sizes.

SAFETY PRECAUTIONS

The container should be protected from extreme hot and cold temperature. It should be properly closed and kept in an upright position after use. In case of contact with eyes rinse with water and seek medical advice.